我起了一个非 root 权限 sshd，想要给 VSCode remote 用。但是 ssh 连接都是 login 成功马上就断了。我贴了 Authentication succeeded 之后的 verbose 输出，麻烦大佬给看一下。
sshd_config 里面都是除了端口号，都是默认值，这里就不贴了。
debug1: Authentication succeeded (publickey). Authenticated to localhost ([127.0.0.1]:22022). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug3: send packet: type 90 debug1: Requesting [email protected] debug3: send packet: type 80 debug1: Entering interactive session. debug1: pledge: network debug3: receive packet: type 80 debug1: client_input_global_request: rtype [email protected] want_reply 0 debug3: receive packet: type 4 debug1: Remote: /home/~/.ssh/authorized_keys:1: key options: agent-forwarding port-forwarding pty user-rc x11-forwarding debug3: receive packet: type 4 debug1: Remote: /home/~/.ssh/authorized_keys:1: key options: agent-forwarding port-forwarding pty user-rc x11-forwarding debug3: receive packet: type 91 debug2: channel_input_open_confirmation: channel 0: callback start debug2: fd 3 setting TCP_NODELAY debug3: ssh_packet_set_tos: set IP_TOS 0x20 debug2: client_session2_setup: id 0 debug1: Sending command: csh debug2: channel 0: request exec confirm 1 debug3: send packet: type 98 debug2: channel_input_open_confirmation: channel 0: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel 0: rcvd adjust 2097152 debug3: receive packet: type 99 debug2: channel_input_status_confirm: type 99 id 0 debug2: exec request accepted on channel 0 debug3: receive packet: type 98 debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug3: receive packet: type 98 debug1: client_input_channel_req: channel 0 rtype [email protected] reply 0 debug2: channel 0: rcvd eow debug2: channel 0: chan_shudown_read (i0 o0 sock -1 wfd 4 efd 6 [write]) debug2: channel 0: input open -> closed debug3: receive packet: type 96 debug2: channel 0: rcvd eof debug2: channel 0: output open -> drain debug2: channel 0: obuf empty debug2: channel 0: chan_shutdown_write (i3 o1 sock -1 wfd 5 efd 6 [write]) debug2: channel 0: output drain -> closed debug3: receive packet: type 97 debug2: channel 0: rcvd close debug3: channel 0: will not send data after close debug2: channel 0: almost dead debug2: channel 0: gc: notify user debug2: channel 0: gc: user detached debug2: channel 0: send close debug3: send packet: type 97 debug2: channel 0: is dead debug2: channel 0: garbage collecting debug1: channel 0: free: client-session, nchannels 1 debug3: channel 0: status: The following connections are open: #0 client-session (t4 r0 i3/0 o3/0 e[write]/0 fd -1/-1/6 sock -1 cc -1) debug3: send packet: type 1 debug3: fd 1 is not O_NONBLOCK Transferred: sent 2708, received 2980 bytes, in 0.0 seconds Bytes per second: sent 60909.1, received 67027.0 debug1: Exit status 1 
Select Language